Been standing around almost wishing I could see the plants grow. I know every day bit by bit... So I'm pleased with progress. I do still need to get a better filter system in place to avoid solids going into the plants. I've tried along with bio balls, to add some additional filter cloth and covered the flow pipe to the plants with a fine mesh. Latter works fine but keeps blocking up quickly. I'll be giving this some more thought. Need a bigger surface area for the filter fabric.
Fish look happy and always ready for a feed. Plants, well I have not heard any complain to me yet....
Experiences with Aquaponics, Hydroponics and Cray Fish cultivation in Thailand and Ghana
Thursday, 18 April 2013
Thursday, 11 April 2013
April 11th Where we're at.......................
Been putting off the additional shade cloth installation till a cooler day. Well can only wait so long and today was a bit cooler around 36Deg... So added in some 80% shade cloth to the steel frame above the raft system, and then Wanna added in the seeds.
I checked the Ph, just shy of 8 and the Nitrates and Nitrites around 0.3 and 0-12.5 respectively. So within a reasonable margin. I also used my hydroponic EC meter. 940 PMM sees a bit on the low side but adequate for salads. Not I suspect for Tomatoes. So we'd planned accordingly and Wanna had prepared seeds adding in Bak Choi (Thai) and, Bak Choi (Vietnamese) and some other greens used locally for stir frys. This time we used new seeds. Earlier we used up our old ones and all the packets has a use by date, we exceeded them all by a few years..... So little success earlier and really we cannot be to surprised.
Since we started this second system I had always planned to keep tidy and well organised. However we also started with the premise that we would do it as cheaply as possible not a completely compatible idea out the the garden environment. So slowly we have made improvements. I've put the tanks on a concrete base and added a small concrete path round the side of the Grown beds. We also have lighting and spare electric sockets. So now beginning to look the part. All these extras being done while we completed the house, again keeping costs low and using up all the surplus bits from house construction. Amazing have you ever noticed how much waste is generated in house construction, meters of electrical cable for a start and short lengths of plastic water pipe. Well I think I found a use for most of it.....
Also with the revamp we've drilled holes in the deliver pipes from fish tank to settlement tank to avoid air blockage which was a bit of a problem, Cleaned out the aeration tank and added proper bio balls instead of old plastic cuttings from water pipe...I've added a short slide show of today's status. Main thing to watch over coming weeks will be the plant progress. Having been very slack on counting fish numbers and mortality etc I can only guess at food quantities, if they come for food I feed them..
I checked the Ph, just shy of 8 and the Nitrates and Nitrites around 0.3 and 0-12.5 respectively. So within a reasonable margin. I also used my hydroponic EC meter. 940 PMM sees a bit on the low side but adequate for salads. Not I suspect for Tomatoes. So we'd planned accordingly and Wanna had prepared seeds adding in Bak Choi (Thai) and, Bak Choi (Vietnamese) and some other greens used locally for stir frys. This time we used new seeds. Earlier we used up our old ones and all the packets has a use by date, we exceeded them all by a few years..... So little success earlier and really we cannot be to surprised.
Since we started this second system I had always planned to keep tidy and well organised. However we also started with the premise that we would do it as cheaply as possible not a completely compatible idea out the the garden environment. So slowly we have made improvements. I've put the tanks on a concrete base and added a small concrete path round the side of the Grown beds. We also have lighting and spare electric sockets. So now beginning to look the part. All these extras being done while we completed the house, again keeping costs low and using up all the surplus bits from house construction. Amazing have you ever noticed how much waste is generated in house construction, meters of electrical cable for a start and short lengths of plastic water pipe. Well I think I found a use for most of it.....
Labels:
1000 litre system,
Progress,
Seeds,
Upgrading System,
Water Testing
Sunday, 17 March 2013
Maintenance
Spent the morning doing repairs to my raft system. I built it on an old set of hydroponic frames. So it seems a good idea at the time. However the additional weigh of the raft system has resulted in the frames sinking into the ground. The local soil is a very light clay. Hard as rock and dusty when dry and slippery mud when wet. So any slight moisture and the system collapsed... Bummer.
Still today we redid the frame supports and added some angle iron to sides and undersides of the polystyrene raft. Should be good to go. Unfortunately we lot our stock of plants which as it happens were doing abysmally...
So time to move on. Next crop. We'll keep recirculating to keep the fish happy. Should commence reseeding tomorrow.
I'll reset everything back in its rightful place tomorrow and also sort out the seedling table and tidy up the area. It has all been a bit full on recently and a very hectic time. Finishing the house, Work prospects etc so this has not received priority. Cold beer this evening and start again tomorrow.
Still today we redid the frame supports and added some angle iron to sides and undersides of the polystyrene raft. Should be good to go. Unfortunately we lot our stock of plants which as it happens were doing abysmally...
So time to move on. Next crop. We'll keep recirculating to keep the fish happy. Should commence reseeding tomorrow.
I'll reset everything back in its rightful place tomorrow and also sort out the seedling table and tidy up the area. It has all been a bit full on recently and a very hectic time. Finishing the house, Work prospects etc so this has not received priority. Cold beer this evening and start again tomorrow.
Saturday, 9 March 2013
Small upgrade to tidy the place up.
Decided to concrete some of the surrounding area to the tanks and seedling area. Definetely required before the rainy season. The dusty soil just turns to mud. Horrible to walk on. I'll also be doing a pathway between the runs in due course. Thats definately for another day.
Concreting scheduled for later today but maybe delayed till tomorrow. Depends on having suffucient aggregate. Easy to buy but been busy fixing a water leak... Another story altogether.
Concreting scheduled for later today but maybe delayed till tomorrow. Depends on having suffucient aggregate. Easy to buy but been busy fixing a water leak... Another story altogether.
Monday, 18 February 2013
General Update 1000 litre system
Been a hectic last two weeks. Busy on house, driving new motorbike etc so Aquaponics has not been taking the No 1 spot. This last two weeks we've lots about 5 fish. The system is not overloaded but I think they were being slowly killed by love. i.e. to much food. So a couple of days off should do the trick. I've done some water tests nothing major to report. Reading up the general consensus is the system needs 4-6 months to stabilise. So 6 weeks in is not to bad.
We've added in our NFT table which started yesterday. To early to say if it will work. For salads I expect it to be fine but for tomatoes doubt there is a high enough concentration of nutrients to really get it all moving in the right direction.
The first two photos show our new tables NFT and the third the inside of the tunnel with the deep water and polystyrene floats.
Pictures tell a thousand words...
We've added in our NFT table which started yesterday. To early to say if it will work. For salads I expect it to be fine but for tomatoes doubt there is a high enough concentration of nutrients to really get it all moving in the right direction.
The first two photos show our new tables NFT and the third the inside of the tunnel with the deep water and polystyrene floats.
Pictures tell a thousand words...
Saturday, 2 February 2013
New System Part 7
New System Part 6
Things are going well. Did some water testing and things look good. We did have some trouble getting the tanks to stop leaking. I have been unable to locate a shop that sells rubber grummets. Bit of a problem. But for now plasticine seems to work. The leaking makes the ground soft and then the tanks tilt more. Sort of self perpetuating....
But all good. Next job is to add in some NFT pipes to see if I can these going as well. (added a picture of it half done). Only doubt I am having is if the fish are producing enough nutrients to feed so many plants. The system is new so does need some time to get established. I've got a EC meter for measuring the amount of nutriens in the water and will start using it this week. Interest all the stuff I'll saved over the years from my earlier hydroponic farming as it is all coming back into use. Feels good not to have so much waste and also gets rid of a lot of crap in my store!!!
One thing I have not figured out yet is why the polystyrene trays have a series of channels and then a sheet that side on top with holes. Well I know if for irrigation but my question is why 10 run channels in the base polystyrene and 6 rows of holes. Means some of the plants have to struggle a bit to get down to the water flow. I've not [put this to clearly but it is difficult to explain. Anyway all going OK for now.
But all good. Next job is to add in some NFT pipes to see if I can these going as well. (added a picture of it half done). Only doubt I am having is if the fish are producing enough nutrients to feed so many plants. The system is new so does need some time to get established. I've got a EC meter for measuring the amount of nutriens in the water and will start using it this week. Interest all the stuff I'll saved over the years from my earlier hydroponic farming as it is all coming back into use. Feels good not to have so much waste and also gets rid of a lot of crap in my store!!!
One thing I have not figured out yet is why the polystyrene trays have a series of channels and then a sheet that side on top with holes. Well I know if for irrigation but my question is why 10 run channels in the base polystyrene and 6 rows of holes. Means some of the plants have to struggle a bit to get down to the water flow. I've not [put this to clearly but it is difficult to explain. Anyway all going OK for now.
Subscribe to:
Posts (Atom)